Guide: How To Set TP-Link Router as WAP
TP-Link routers are a popular choice for this home users who want to balance features with price and include decent security in the mix. Known more for their Wi-Fi performance than anything else, they are a great addition to one home network. If you have one and want to set it up as a wireless access point, this tutorial is for you.
How to set up a home media center: The complete guide ..
What is the difference between a router and an access point?
A router is a device that connects two or more devices in order to provide internet access. An access point is a device that provides internet access to one or more devices.
A router is an intelligent device that uses its own firmware for firewall, port forwarding, NAT (Network Address Translation), DHCP, DNS and others features. It can also have wifi capabilities.
Routing tables help decide where to route traffic. A router detects which devices are on your home network and identify them using MAC addresses. It will also check whether you are using a modem or connecting it directly to your broadband connection and will be able to route internet traffic accordingly.
A wireless access point (WAP) is a device that can be used to extend the wireless network or provide wireless access if your router does not have WiFi. A standalone WAP device is a different matter. These devices act as a wireless gateway to your network and can be used to extend the wireless network or provide wireless access if your router does not have WiFi. ..
A wireless access point cannot intelligently route traffic, only send it to the router.
A router is a node in the network and the wireless access point is a ramp that directs all traffic in one direction towards the junction. The job of the router is to direct all traffic to the destinations where they want to go.
TP-Link router as a wireless access point
In this tutorial, we will configure a TP-Link router as a wireless access point to act as a range extender and WAP.
You must first connect your TP-Link router to your main router via Ethernet. If you use Wi-Fi, you’ll need to set up a separate network and use another router as a range extender.
IP addressing is important. If your main router uses a DHCP range from 192.168.1.10 to 192.168.1.100, you will want to configure the TP-Link router outside this range but within the same subnet. For example, assign it 192.168.1.210
The TP-Link router you just set up should be able to access the internet.
How To Set TP-Link Router as WAP: benefits
Faq
Final note
TP-Link Router as WAP: A Guide
If you have any queries about the How To Set TP-Link Router as WAP, then please ask us through the comment section below or directly contact us.
