How to Reset a Ring Doorbell – Guide
To reset the ringtone on your Ring doorbell, press and hold the up button for about 30 seconds. You will know that the ringer has been successfully reset when you see a white light rotating or flashing on the front of the device. Reset is complete when the light is off. This process can take several minutes, so be patient. If you are keeping your ring doorbell, you will need to add it back to the Ring app after resetting it. You can find instructions below at how to do this, plus what to do if you are getting rid of your ring doorbell. ..
Resetting a ringer to fix an issue
If you are having trouble connecting your Ring Doorbell to Wi-Fi or experiencing other issues, resetting the device may help. ..
If the Reset button is not working, press and hold the Reset button for at least 15 seconds.
For Ring Doorbell 2, press and hold the black button on the front of the camera to start recording.
For Ring Doorbell Pro, press and hold the black button on the right side of the camera and wait for the camera to start recording.
The button is reset.
The reset completes when the light goes out.
How to Reset a ringtone to disconnect your account
If you’re selling or giving your Ring doorbell to someone else, reset it so they can use it. You don’t need to do anything with the doorbell. Instead, disconnect the doorbell from your account in the Ring app so it can be registered and used by someone new.
Open the Ring app and tap the Ring doorbell you want to disconnect.
Scroll down to “Location Services” and turn off “Location History.” ..
If you want to remove your device from iCloud, follow these steps:
- Tap Remove Device on the Home screen.
- Confirm device removal by tapping Remove. ..
Delete the device.
Final note
How to Reset a Ring Doorbell If you have a ring doorbell, it may need to be reset. Here are some tips on how to do this:
- Remove the battery from the doorbell. This will help stop the ringing from continuing.
- Disconnect the power cord from the doorbell. This will also stop the ringing from continuing.
- Place a piece of paper or cardboard over the button on top of the doorbell and push down on it so that it pops out (it should now look like this). Now remove any screws that may be holding onto the button (if there are any). If everything looks good, reattach everything with new screws and screwdriver! If not, follow these steps again: 4. Put new screws into place and screwdriver into place on top of button (should now look like this). 5. Push down on button until it pops out (should now look like this). Now reattach everything with new screws and screwdriver!
