How to Fix MacBook Not Turning on Issue – Guide

Your Mac won’t turn on or start up. Here are some basic steps to try to fix it:

  1. Check the power connection: Make sure the power cord is connected properly and that there’s no obstructions in the way.
  2. Do a power cycle: If your Mac has a power button, press it and wait until the light goes out. If your Mac doesn’t have a power button, hold down the Option key and then press the power button.
  3. Boot into recovery mode: To enter recovery mode, hold down the Option key and then press the Power button at once. When you see “Apple” appear on screen, release the Option key and press again Power button to enter recovery mode.
  4. Check the file system: To check if your Mac has any files or folders, open Finder and look for “Files” or “Folders.” If there are any problems with files or folders, you’ll need to take steps to fix them before you can use your Mac again.

This article is about how to fix problems with macOS, specifically the changes that can occur depending on your operating system. However, if you have a Mac M1, you will also notice some differences in how you perform some tasks, such as starting the machine in safe or recovery mode.

1. Make sure your Mac is turned on

If your Mac won’t start up, the first thing to do is press and hold the power button for at least 10 seconds. If that doesn’t work, you can try these other steps: -If your Mac has a battery, remove it and try starting up again. -If your Mac has a power adapter, plug it in and try starting up again. -If you have an external hard drive connected to your Mac, disconnect it and try starting up again. -If you have an Apple Thunderbolt Display connected to your Mac, disconnect it and try starting up again. ..

  1. Check the power cord and plug it in to an outlet.
  2. Check the computer’s battery level and make sure it is charged.
  3. Check the computer’s system requirements and make sure they are met.

Check your power connection to make sure it’s working properly. If it isn’t, you may need to replace the power cord.

Don’t be a cliché: make sure your Mac is properly connected and the battery is charged. If your MacBook won’t charge, read this.

If you’re having trouble connecting your device to the power source, try a different power cord or adapter. ..

If you are experiencing problems with your Mac, it is possible that the issue lies with the power cord. If you have a friend with a Mac power cord compatible with your machine, try using theirs to see if that resolves the issue. If this does not work, then it may be a simple solution involving finding a second-hand power cord on eBay. However, we would advise against purchasing third-party power cords that are not made by Apple, as they are more likely to be faulty and possibly dangerous. ..

A power surge can happen when two or more electrical circuits in your home are overloaded. If you have a power outage recently, it could be because of one of these circuits. If you have a power adapter that is damaged, you may need to replace it.

We’re not sure if it’s that easy, but we’ll try to fix the cable.

Apple sells several cables for charging Apple Macs and laptops. You should find what you need here: Apple power adapters. Additionally, read: which MacBook charger do I need?

If you’re having trouble starting your Mac, disconnect all of its accessories and try again. Maybe one of your peripherals is causing the issue.

If you recently installed new memory or a new hard drive, make sure they are installed correctly and are compatible. If possible, reinstall the old memory or hard drive and see if that helps. ..

If you’re not able to fix the issue, it’s time to move on to the next step.

2. Run a power cycle

If you’re not hearing any signs of life, you can perform a power cycle on your Mac by turning off the power and then back on.

If you’re using a MacBook, and you hear a hissing sound when the computer’s power is cut off, wait ten seconds and restart the computer. ..

If your Mac is a laptop, you will need to hold down the power button for at least ten seconds before plugging it back in and trying to restart it. ..

If you press and hold the power button, you can access the boot options. This means that if your Mac is not working properly, you can try to fix it by running the options below to get it up and running.

If your Mac won’t start up, there are a few things you can try before you take it to the repair shop. First, make sure that all of your cables and connections are plugged in correctly. Next, try running a power cycle on your computer. If that doesn’t work, try opening up the start up options by pressing the Power button on the front of your Mac. If those don’t work, you may need to take your Mac to a repair shop. ..

3. Check your screen

If you are using a desktop Mac, such as a Mac Pro or Mac mini, you may need to connect a separate monitor to your computer in order to use the Finder.

If you’re having trouble getting your Mac to start up, there’s a chance that you may have a problem with the screen you plugged it in to. Try plugging it into another port on your Mac and see if that solves the problem. If not, then you may need to take your Mac in for repair. ..

If your Mac won’t start up, it may be because it can’t access its display. If that’s the case, you may have a display hardware problem.

If you think your monitor is not working, the first step is to check if it’s plugged in and turned on. If it’s not, try these troubleshooting steps:

  • Make sure your Mac has the latest software updates installed.
  • Try connecting your monitor to another Mac or PC using a cable.
  • If you have an Apple Thunderbolt Display, try connecting it to another device using a Thunderbolt cable.
  • If you have an Apple display that uses an integrated graphics processor, try turning off the display and then turning it back on. ..

If your Mac is not powering on, check the power supply and monitor power. ..

Please confirm that all cables are securely connected.

Make the Mac and the display one device.

If you’re using a separate monitor, unplug the video cable and plug it back in. ..

If using more than one monitor in a ‘daisy chain’, disconnect all monitors and test using just one. If using more than one monitor in a ‘daisy chain’, it is recommended to disconnect all monitors and test using just one.

If you are using a monitor that is not supported by your graphics card, you can try using a different adapter. ..

To adjust the screen resolution on an Apple device, users can go to System Preferences and select Display. There, they can adjust the resolution by selecting a higher or lower number. ..

4. Initialization up your Mac in safe boot

If you want to start your Mac in a safe mode, you can do so by following these steps:

  1. Restart your Mac.
  2. Hold down the Shift key while restarting your Mac.
  3. Choose Safe Boot from the menu that appears when your Mac restarts.
  4. Follow the on-screen instructions to enter safe mode. ..

To enter safe mode on an Intel-powered Mac: Start your Mac up while holding down the “Shift” key. Safe Boot may take a while to start (if it works). ..

To enter safe mode on a Mac with M1:

  1. Press and hold the button until boot options appear on the screen.
  2. Choose your boot disk.
  3. Now press and hold Shift and click Continue in Safe Mode.
  4. Then release the Shift key.
  5. You will see the words Safe Mode in the menu at the top right of the screen.

Intel-powered Macs in Safe Boot mode can give you feedback on what’s going on.

If you are having trouble starting up your Mac, Safe Mode may help. In Safe Mode, only essential system files are loaded. This can help you troubleshoot startup issues. ..

Safe mode will look different, with blocks of color instead of transparency. The biggest freebie is the Dock at the bottom of the screen.

If your Mac is in safe mode, you can run certain checks and make changes to fix the problem. ..

If you think you can start up in safe mode, it is likely that the problem is related to one of your startup items. In which case, you should go to System Preferences > Users & Groups and remove all items. You can use trial and error to find out which startup item is causing the problem. ..

5. Reset the PRAM / NVRAM

On Intel Macs, the term “NVRAM” is being redefined to include a new feature called “RAM.” RAM is a type of storage that can be used to store data, and on Intel Macs, RAM is automatically reset when the computer’s power goes out. However, there is a way to reset RAM on an Intel Mac – we discuss it here: How to reset RAM on an M1 or Intel Mac.

If you want to keep your volume and screen resolution settings even when your Mac is turned off, you can create a “memory snapshot” of your Mac using the “System Preferences” app. ..

resetting your data isn’t harmful, but frankly, it’s also rarely genuinely helpful. But it can’t hurt.

  1. Open the Apple menu and select System Preferences.
  2. Scroll down to the Security section and click on the “PRAM/NVRAM” tab.
  3. In the “Password” field, enter your original Apple password (or a new one if you’ve changed it recently).
  4. In the “Format” field, choose “12-digit hex.”
  5. Click on the “Reset” button to change your password and save your changes.

Command, Option (Alt), P and R, and turn on your Mac.

The Mac restarted again, but I can’t get it to start.

Apple is rumored to be working on a new iPhone that will have a redesigned home button and may include a new form of facial recognition software. ..

Resetting the NVRAM on your Mac can be done using Terminal, as discussed in the article linked above. ..

If you see a progress bar on startup after following these steps, your Mac is likely good to go. However, in some cases the Mac will shut down halfway through the progress bar. ..

Final note

If you’re having trouble turning your MacBook on, there are a few things you can do to try and fix the issue. This guide will teach you how to troubleshoot and fix common issues with your MacBook’s battery, logic board, and startup process. If none of these solutions work, you may need to replace your MacBook’s battery or logic board. ..