How to Fix ‘Mac Boot­ing With Black Screen’ Issue – Guide

If you’re having trouble waking your Mac from sleep, it may be because of a power issue. Here are some tips to try and fix the issue: -Try turning off your computer and restarting it. -Try pressing and holding the power button for about 10 seconds to turn off your computer completely. -Try unplugging all cords from your computer and plugging them back in again. -Try using a different type of charger or battery for your computer than what is currently being used.

  1. A virus has infected your Mac and is causing it to go black.
  2. Your battery is low and is not holding up well anymore.
  3. You are using an old or unsupported software application that is causing problems with your Mac’s performance.

A recent trend in mobile technology is the addition of third-party apps that allow users to expand their screens by adding more space on either side. This can be a great way to keep track of important information or watch a movie while on the go. However, there are some potential risks associated with this type of technology, including data theft and privacy concerns.

Apple released a new operating system for their devices. ..

Some users have reported that their displays are displaying incorrectly and that the power settings are not working as they should. This could be a sign that your device is experiencing corruption. If you experience any of these issues, please try restoring your device to its factory settings. ..

Fix black MacBook Pro startup screen

There are a few simple solutions to fixing your MacBook Pro startup black screen problem. You can start by trying to troubleshoot the issue yourself, or by seeking help from an expert. If that doesn’t work, you can try some more complex solutions. ..

  1. Remove the battery and reformat the computer.
  2. Remove any software that is installed on the computer, including Adobe Photoshop and Illustrator.
  3. Reset the computer to its factory settings.
  4. Install a new battery and reformat the computer again.

Solution #1: Make sure the power is turned on

Is your Mac charging? If the green light is on, it’s charging. If the light is off, it’s not charging.

If your Mac makes any noise, it may be because of something wrong. Make sure you’re looking for any signs of trouble before you start troubleshooting.

If your Mac was turned off due to power, try charging it for at least ten minutes before trying to turn it on again.

If you still see the black screen on your Mac, it may be time to check for a virus.

Solution 2: Disconnect all peripherals

If you’re having trouble solving your Mac’s black screen issue, the only accessories you should connect are the charging cable and adapter.

Remove all devices that are not connected to the Mac. Connect only the devices that are needed to use the Mac.

Some peripherals can launch their own dialogs that can interfere with your Mac’s display settings. ..

If that doesn’t solve the problem, something else could be the problem. ..

Solution #3: Adjust the screen brightness

It’s possible that you accidentally pressed the keyboard brightness keys, or it could have been your cat. ..

To turn on your Mac’s black screen, use the F1 and F2 buttons.

Solution #4: Force your MacBook Pro to restart

To restart the Mac, hold down the power button until it turns off, then turn it back on. ..

If you have the Mac startup black screen issue, hard reset may be a solution.

Forcing a Mac to restart can fix bugs and errors. If you’re experiencing problems with your computer, it may be worth trying to force it to restart. This can help fix any issues that may have been caused by the computer’s software or hardware.

Solution #5: Reset your Mac’s NVRAM settings

NVRAM is a type of memory that doesn’t require power to function. This makes it perfect for devices that need to be able to keep track of data even when the power is off.

This feature allows users to store custom settings for various devices in memory, so that they don’t have to re-enter them every time they use the device. ..

Resetting the NVRAM can effectively restore to factory settings everything connected with the boot process, including those connected remotely.

  1. Open the Mac NVRAM utility.
  2. Scroll down to the bottom of the utility and click on the “Reset” button.
  3. Enter your desired settings and click on the “Reset” button again.

Solution #6: Reboot the system management controller

Resetting the SMC will clear out any settings related to power management on your Mac. This can solve issues like heat, sleep issues, fans, and black screen display issues.

  1. Remove the battery from the MacBook Pro or MacBook Air.
  2. Place the laptop on its back with the battery removed.
  3. Hold down the power button and use your fingers to twist the power cord around a few times to remove it from the computer.
  4. Lift up and remove the top cover of the computer.
  5. Disconnect all cables from the computer (except for one that goes to your outlet).
  6. Place the laptop on its side with its screen facing down and its keyboard facing out (it should be upside down).
  7. Push down on one of its corners until it pops out from behind it, then lift up and remove it (leave both corner posts in place).

Apple is hoping that when the Mac starts up, the black screen that has been present since last week will be gone and users will be back to their normal routines. ..

Solution # 7: key sequence (keyboard)

If your Mac starts up, the black screen may disappear and your MacBook Pro or MacBook Air may return to normal; however, if it doesn’t boot, try a keystroke sequence to eliminate the black screen.

If your Mac is turning on but the screen is still black, press and hold the Option key and then press the F5 key.

This process is unusual, but it has worked for many.

Solution #8: Reset PRAM

If the MacBook Pro’s reset screen persists, a PRAM reset may be the solution. ..

If you want to reset your Mac, you can use the “Reset This Mac” option in the “Mac PRAM” menu. ..

If you shut down or restart your Mac, the settings in PRAM continue even if they get corrupted. This can cause problems like a black screen on Mac.

  1. Turn off your computer and wait 10 seconds.
  2. Restart your computer and hold down the F8 key as your computer starts up.
  3. Select the Advanced Options menu and select the PRAM option.
  4. Enter the correct password and press Enter to reset the PRAM. ..

Solution #9: Boot into Safe Mode

If you’re experiencing a black screen on your Mac, there is a simple solution. Boot into safe mode and run diagnostics on the disk to fix the problem. ..

To start your computer in safe mode, follow these steps:

  1. Restart your computer.
  2. When the computer starts up, press and hold the F8 key until you see the Windows Advanced Options menu.
  3. Select Safe Mode from the menu.
  4. Follow the on-screen instructions to start your computer in safe mode. ..

After you finish starting up, restart again to get out of safe mode and start normally. If the Mac black screen issue is still present, try a different power supply or adapter. ..

Solution #10: Enter the password and press Return

This is an amazing solution that works when the Mac black screen startup issue persists.

If you’re using your regular login password and press the Enter / Return key on your Mac, the Mac will boot up and you’ll be good to go. Try it out and see if it works for you!

Solution #11: Turn off automatic graphics switching

This solution only works for black screens on MacBook Pro with two graphics processors. ..

Some MacBook Pro models have two graphics cards that switch automatically. Sometimes these models can boot directly to a black screen.

To solve this problem, you can disable automatic graphics card switching on your MacBook Pro. ..

Solution #12: Reinstall macOS

This is the only way.

If you’re having trouble with your macOS computer, there may be a bigger problem than just the hardware and software solutions you’re using. You may need to reinstall macOS to fix the issue.

You can choose to install the same MacOS product or purchase a new MacOS and install it on your Mac. ..

Final note

If you have a Mac that starts up with a black screen and no sign of life, it may be because the computer is having trouble starting up. In this guide, we’ll show you how to fix the problem. If you’re not sure how to fix it yourself, our tech support team can help you out.