Guide: Robocopy Commands: complete list of Robocopy commands
Robocopy is a powerful tool that you may not have known about. It can help you transfer files quickly and easily, even if they are in different folders or on different devices.
This is an external command that Robocopy was available in the Windows NT and Windows 2000 resource kits and all Windows operating systems after Vista (7, 8 and 10).
Robocopy is a powerful tool that can be used to copy files and folders. It can be used to copy files and folders, or to copy files and folders that are located on different computers. Robocopy can also be used to copy files and folders that are located on different machines.
Robocopy parameters and syntax
Robocopy Syntax
robocopy - copy a file from one location to another
Robocopy parameters
The path of the source folder is C:\Users\username\AppData\Roaming.minecraft
The destination folder is located in the Documents folder on your computer. ..
The “File” window will list the files that will be copied. Files that are matched by the wildcards in the “File” window will be copied. ..
- Copy: Copies the contents of the specified file to the clipboard.
- Paste: Pasts the contents of the specified file to the clipboard.
Robocopy options
-c “C:\Windows\system32\cmd.exe” -c “C:\Windows\system32\rundll32.exe” -c “C:\Windows\system32\cmd.exe /c start /s C:\Windows\system32” The following options are added to the end of the command. This also includes file selection, retry, logging and job options. -c “C:\Windows\system32\cmd.exe” -c “C:\Windows\system32\rundll32.exe” -c “C:\Windows\system32\cmd.exe /c start /s C:\Program Files (x86)\Microsoft Office 15\Office15Startup”
Copy the sub-directories in a file, except the ones that are empty.
The “e” key is for copying subdirectories, including the empty directories. ..
N is for copying the top N levels in the tree of the source folder.
/ z files are copied in a rebootable mode to make them easier to access and manage.
Backup files are copied in backup mode. ..
Zb uses a rebootable mode that allows for backup if access is denied.
EFS RAW copies all encoded files in the system into a new file system.
The CopyFlags option tells which file properties to copy. The correct values for this option are: D is data, O is owner info, A is attributes, T is timestamps, U is audit info, and S stands for Security = NTFS ACLs. ..
Copy files securely using the same security features as copying from a remote location.
/copyall: Copies the entire contents of the specified file. ..
Nocopy does not work with / purge, so you need to use a different method to copy files.
/ secfix all files get file protection fix, including skipped files. This will help to protect your files from being accidentally accessed or deleted.
/ timfix all files are given a fixed time, including skipped files. If a file is skipped, it is given a fixed time of 0 seconds.
/purge removes all files and folders from the source.
/mir mirrors the directory tree (same effect as / e plus / purge).
Moves files and removes them from the source after they are copied. ..
Moves and removes files and folders from the source when they are copied. ..
Rashcnet gives attributes of source files to copied files.
Rashcnet removes attributes of source files from copied files. This is a useful tool for cleaning up copied files, as it removes any unnecessary information that may have been included in the source files.
Fat creates destination files using only 8.3 file names. ..
256 is the maximum path length supported in Windows. If you attempt to create a path that is greater than 256 characters, Windows will disable support for that path. Monitors source changes to ensure that it runs again when it detects more than 256 changes. ..
A source monitors and will run again if it detects changes within a certain number of minutes.
MT makes multi-threaded copies of files with a specified number of threads. N must be between 1 and 128. This feature is not compatible with / EFSRAW and / IPG parameters. You can redirect the output via the / LOG option if you want to speed things up.
This tool provides information about when to start new copies of a document.
/ pf checks the operating hours to ensure that the files are being processed in the correct time frame.
/ ipg: n is for users with lower bandwidth and less storage space. It inserts gaps between packages and reduces the amount of data that can be stored in a package.
File selection options
A file’s archive attribute indicates that it is a copy of a file with a set archive.
/ m does the same as above, but the attribute is reset.
IA:[RASHCNETO] is a file-scanning tool that only scans files that have a certain attribute. ..
/ xa:[RASHCNETO] exclude files with specific attributes and excludes any files with the same attributes.
/ xf exclude files matching the specified paths, names, or wildcards.
/ xd -exclude “C:\Program Files (x86)\Microsoft Office” -exclude “C:\Users\username\AppData\Roaming\Microsoft Office”
This is a warning to avoid modified files in the file system.
This is a warning to users of the xn–no-newer-files extension. If you are using this extension to store files that have not been updated in a while, you may experience problems with them.
This is a request for your help. I need to remove older files from my computer.
This is a copy of a document that was originally filed in the /xxx/ directory. The original document was filed on _____.
This is aJournalist’s writing style.
/ records the same files.
It is for recording modified or tweaked files.
-max: Sets the maximum file size and excludes files larger than the specified number of bytes and any files with a size greater than the given value.
min: sets the minimum file size and excludes files smaller than a certain size.
maxage: Sets the maximum file age and excludes files created before a certain date or older than a certain number of days.
minage: Sets the minimum file age and excludes files created after a certain date or later than a certain number of days.
Sets the maximum last access date for a file, excluding files that have not been used since the specified date.
Sets the minimum last access date, excluding files opened since then.
If N is set below 1900, the day count will be displayed. Otherwise, N shows a date in the standard YYYYMMDD format.
This exclusion rule excludes all nodes from the given data set.
The file-formatting software FFT estimates the time it will take to format a FAT file.
Retry options
This report shows the number of failed copy attempts for a given website. The default value is 1 million.
/ w: N shows the waiting time between two retries, default 30 seconds and if the first attempt fails, the waiting time increases by N seconds.
The registry stores the options and commands in the form of reg files. By default, these files are located in the C:\Windows\System32\drivers\etc folder. You can change this location by using the Registry Editor.
/ tbd system will wait for shares to be defined before starting the system
Log options
Lists the files without deleting, timestamps or copying.
The reporter selects a few files and then reports on the additional files.
Verbose output from v indicates that it has detected files that have been skipped. ..
The timestamps in the source file are included in the output.
The “fp” command prints the full path of the file or files specified. ..
This is a data structure that represents the size of a data block.
ns file sizes are not recorded.
NC file classes are not registered. ..
The NFL does not keep track of file names, so there is no way to identify which teams’ players are registered with the league.
The directory names are not registered, which means that they cannot be used to refer to files or folders.
The copyprogress bar is not displayed. ..
If you need an estimate of when the process will be completed, we can provide one.
The Status output is stored in the log file and overwrites the current log file.
Job options
The job file contains the parameters for the specified job.
/ save: job file contains the saved parameters.
/quit stops the program at the command line, checking the parameters.
This error message means that you do not have a source directory specified when you create a new project. To create a new project, use the nosd command.
This message appears when you try to create a new destination folder. You may need to specify a destination folder if you want to use the same name for multiple folders in your computer.
Robust copy
Robocopy is a powerful command-line tool that can be used to copy files and folders. In this article, we will discuss the most useful Robocopy commands. ..
Robocopy Commands: complete list of Robocopy commands: benefits
Faq
Final note
This guide provides a complete list of Robocopy commands, so you can easily copy files and folders. If you have any questions about this article, feel free to ask us in the comments section below. You can also share this article with your friends to help them learn about Robocopy commands. ..
If you have any queries about the Robocopy Commands: complete list of Robocopy commands, then please ask us through the comment section below or directly contact us.
