When you open the charging case, depress the setup button on the back of the charging case, then tap “Connect” when prompted to connect your AirPods with an iPhone. The AirPods will instantly identify other devices linked to it, including iPads, iPods, Macs, and Apple Watches, once you connect them to a device connected to your iCloud device.

The new Apple W1 chip enables the smooth pairing of the AirPods with Apple products. The W1 processor regulates battery life and creates effective Wi-Fi for a better connection. Here are 10 AirPods tips and tricks you should also know about:

  1. Keep your AirPods charged by using a lightning cable or an adapter.
  2. If you lose your AirPods, try to find them by turning on Find My iPhone and scanning for their Bluetooth signal. If they’re not nearby, you can reset them by holding down the power button for five seconds until they turn off and then turning them back on.
  3. If you have trouble connecting your AirPods to your device, try restarting both devices and trying again.
  4. To make sure your audio is always clear, make sure that your iPhone’s volume is turned up all the way and that the microphone is close to your mouth when you’re using the AirPods.
  5. If you want to listen to music without having to take out your phone, open up Control Center on your iPhone and tap on Music then tap on Playlist then select a playlist that you want to listen to without having to open up the app or go through menus on your phone. 6 .If you want Siri to read text messages aloud while you’re wearing an AirPod, say “Hey Siri” followed by the person’s name or message like this: “Hey Siri, read my message.” 7 .To control playback of music or podcasts while wearing an AirPod, double-tap one of the earbuds once it’s been paired with your device; this will bring up a control panel where you can play/pause/skip tracks, as well as adjust volume levels (you’ll need headphones plugged in for this feature). 8 .If there are multiple people in a group chat who are all wearing AirPods but no one wants their voice ..

10 Apple Airpods tips and tricks you should know

Change the Name

To change the name of your AirPods Pro, go to Settings on your iPhone and find Bluetooth. Under “Name,” tap the name as it is now and then choose a new name. Tap Done when you’re done. ..

Customize the Presses

You can adjust the default behavior of either AirPod Pro such that pushing the stem toggles between Noise Cancellation and Transparency for one or both of them. Go to Settings > Bluetooth and tap the information symbol next to your AirPods when wearing the AirPods Pro. The Left or Right entry may be found in the Press and Hold AirPods section by tapping it. ..

Touch the entry to add the Off setting to the mix while keeping Noise Control as the action that is activated when you long-press in this area. Click the item for Siri at the top to switch the action from Noise Control to Siri.

Customize tap commands of each AirPod

When you double-tap the top of an AirPod (first or second generation), a number of functions, such as calling Siri, switching music, and play/pause, are available. By tapping the stick of the AirPods Pro, you can accomplish the same thing as with regular AirPods.

To assign customized actions to each AirPod, connect them to your iPhone or iPad and follow these steps:

  1. Open the AirPods app on your iPhone or iPad.
  2. Tap on the AirPods icon in the bottom left corner of the app.
  3. Select Settings from the menu that appears.
  4. Under “AirPods Actions,” tap on Add New Action.
  5. Enter a name for your action and select a category from the list that appears (such as “Phone Calls”).
  6. Tap on Add Action and then select one of the options that appears (such as “Call”).
  7. Repeat these steps to add additional actions, if desired. ..

Open Bluetooth and tap on the name of your Bluetooth device.

If you have an iPhone, iPad, or iPod touch with iOS 11 or later, you can use the “Tap to Pair” feature to pair your AirPods with your device. ..

Left and right double-tap toggles between the desired actions.

Use AirPods as a remote mic using Live Listen

The AirPods 2nd generation and Pro models can use the Live Listen function to transform your iPhone into a microphone and speaker while wearing the AirPods in your ear. This enables you to clearly hear the dialogue in a busy setting.

If you’re within Bluetooth range of an iPhone, you can listen to the discussion taking place on that phone with your AirPods. You could even use it as a stealth device. For more information on using Live Listen, visit our article.

Announce messages via Siri

In Siri & Search, you can access your settings for your iPhone. This includes things like how often to wake up the phone, how to control music playback, and more.

Tap Announce Messages and enable it. Now, when you receive a message, you’ll see a notification that says “Tap to view.”

For Messages, you can choose to announce for everyone, contacts, recent, or only favorites.

Use one AirPod

The AirPods are not releasing their contents at the same rate.

If you have seen this as well, try placing one AirPod at a time in the charging case. This will give you additional listening time.

Reset AirPods

If you are having difficulty with your AirPods, resetting them may help. This will disconnect the AirPods from any other devices they are linked to, and you will need to reconnect them once more. How to reset your AirPods is available. ..

Share With Other AirPods Users

If you have an iPhone and a pair of AirPods Pro, you can share your audio with someone else by accessing the Control Center on your iPhone and pressing the AirPlay symbol for the current audio. If you have an iPhone and a normal AirPods, or even a Beats headphone, you can still share your audio with someone else by accessing the Control Center on your iPhone and pressing the AirPlay symbol for the current audio. ..

To share audio between AirPods or Beats headphones, tap the Share Audio button. The other pair of AirPods or Beats headphones will then appear. To link the other pair, tap the circle for that one.

Find out who’s calling

With AirPods, you can easily end calls by double-tapping on the stem. Even if you don’t know the caller, it would be great to be able to end a call before it gets too long so you can focus on other things. ..

Siri, when calling someone, now announces the caller before offering you the choice to “cancel friendship?”

Quickly Pair to Apple TV

To pair AirPods with Apple TV, open the Apple TV app and select “Audio Sources.” Choose AirPods from the list and press the “pair” button.

The AirPods connect to your Apple TV and allow you to control the audio on your TV with a remote. You can long press the Play/Pause button on the remote to open the audio menu.

Final Words

  1. Keep your AirPods charged.
  2. Use them regularly and often.
  3. Charge them before you use them again.
  4. Keep your AirPods clean and dry.
  5. Store them in a cool, dark place away from heat or light sources.
  6. Reset your AirPods if they lose their charge or if they stop working properly